A Wall Fire Place Electric Adds Warmth and Style to Any Room
A wall-mounted electric fire place creates a warm and inviting focal point for any room. It can be installed in a flush position with the wall or partially recessing. If recessed, you must follow the manufacturer's guidelines on framing and putting the fireplace inside the wall.
Installation is similar to that of hanging a TV or shelving. The majority of models require an electrician to connect the electrical system.
Easy to Install
A wall-mounted electric fireplace is an excellent option to add warmth and style to any room. electric fireplace wall hanging fireplacesandstove.com is simple to install and does not require exterior venting or gas lines. It is available in many sizes and styles to suit any room of the house. It is important to take into account the location of your house before selecting a particular model.
For instance, if would like to place your fireplace over your TV, make sure the screen is big enough to accommodate it. Also, consider whether furniture will block the view of the fireplace. Finally, a wall mount fireplace will help you save floor space and create more space in your home.
Installing an electric fireplace that is recessed is simple by following the steps that come with it. First, you'll have to frame the opening for the fireplace using 2x6s that are one inch smaller than the finished wall. It is also important to mark the center of the rough opening and the studs should be placed every 16 inches across both plates. Use a level after you have constructed your opening to make sure it is level. Then, screw the mounting bracket into the opening. Remove the side brackets from your fireplace to access the screws.
Once you have hung the fire appliance, connect it to the mounted bracket with large washer head screws and wall anchors. Be sure that all screws are securely driven into the solid backing. It is also possible to connect an electrical outlet to the wall and get a licensed electrician to do according to local codes.
If you don't have carpentry experience You can hire an expert to construct the fireplace wall for you, or install a frame into an existing wall. They can also drywall, tape and mud your walls before you put up your fireplace. If you already have a wall, they can also paint it for a completely completed look. After you've completed these steps, your fireplace will be ready to be used.
Easy to operate
A wall-mounted electric fireplace is easy to operate. A majority of models include an easy remote that controls the effects of flames and heating functions. Some models come with an impressive smartphone app that lets you control the fireplace from anywhere in the room. Some models can be controlled by voice commands via Amazon Alexa or Google Assistant. These features make wall-mounted electric fires an excellent choice to any home.
Check the installation instructions for your particular model before you begin. Some models will require an expert installer, however, others are easy to install on your own. Before you begin, it's crucial to be aware of the amount of weight these units weigh and to ensure that your walls can withstand them. You should also be aware of which direction the heat is blowing and if there are any combustibles around.
Some wall-mounted fireplaces can simply be plugged into an available outlet, while others must be hardwired. If you're not sure if you can do this yourself it is recommended to hire a professional electrician. Depending on the model you might need to perform basic framing, or a bump out to accommodate the electrical cord and plug.
Another thing to keep in mind is that the position of your fireplace will have an impact on its performance and appearance. For example, some people like to have their fireplace at eye level when they're seated on the sofa. If that's you then it's essential that your TV can still be placed over your fireplace.
You can use a spirit-level to mark the position of the brackets on the wall. This will allow you to determine if the wall can support the fire. Verify that the wall has drywall or studs, and ensure that the fire's cord can be able to reach a three-spot electrical outlet.
Easy to Clean
Modern electric fireplaces can be cleaned much more easily than wood-burning or natural gas fireplaces. The reason is that they don't use any fuel, so they don't cause ash or creosote build-up. However, they must be cleaned regularly to ensure they look good and performing at their highest. Cleaning is simple and doesn't require harsh chemicals. You can make use of a cloth slightly dampened with water to clean the exterior of the fireplace, and a dry cloth to clean dust from the inside components.
Before cleaning the fireplace, be sure that it's fully cooling. You should also unplug the unit or, if wired in, shut off the circuit breaker that runs it. Avoid using any liquid cleaners on the grates, since they can pose an electrical risk. Instead, you should use a lint-free, non-smudge cloth that has been slightly dampened by lukewarm water. Avoid using any cleaning products that contain substances that are abrasive, as they can scratch the surface of your fireplace.
Next, you should clean the grate thoroughly with your damp cloth. You may want to also wipe the sides of glass and other parts of the fireplace that aren't covered by the grates. You can make use of a vacuum cleaner with a soft brush attachment to clean any dirt or dust from the interior of your fireplace.
Once you've done this, you can start cleaning the light bulbs and blower. Remember not to use water on the light bulbs or the blower as this could cause an electrical risk. Instead, it's a good idea to use a dry microfibre cloth to remove dust from these areas. To avoid injury, turn off the fireplace before turning it off. Be aware that many electric fireplaces lack ventilation. This is why you must be extra careful when cleaning them. If you require assistance you must always consult the owner's manual.
Easy to maintain
In-wall electric fire places require minimal maintenance so long they are installed and operated correctly. However, it is recommended that an electrician check the unit every year to ensure it is operating efficiently and safely. You can keep the glass surface free of dust and dirt by wiping it.
Before cleaning the electric fireplace, make sure to unplug and turn off the power. This will avoid electric shocks and other dangers. You can remove the access panel or the glass front of the fireplace when it has been turned off. Clean the glass with a dry cloth made of microfibre to remove fingerprints. If the glass is stained with persistent spots or stains then you can dampen the cloth slightly by mixing water and cleaner. If your fireplace has an air blower, make sure to make use of a dry microfibre cloth instead of one that is damp to prevent water from getting into any electrical components.
In general you should avoid using any abrasive cleaning products or paper towels because they could scratch or harm your glass. In the majority of cases, it is possible to simply wipe the surface of the glass using a cloth that is lint-free. If you notice the glass becoming dull or dirty, you can make use of glass cleaner or distilled vinegar to clean the accumulation. Spray the cleaner directly onto the cloth to stop streaks.
If the glass is clean you can put it back in place and plug in your fireplace. If your fireplace has a mirrored surface, you may need to gently rub the mirror using a soft towel to get rid of any streaks. Alternatively, you can buy a pre-made glass cleaner spray that comes in different strengths.
It is also important to clean the air vents and the inlets at the base of your fireplace. They can become extremely dirty and hinder your fireplace's flame effect. For best results, apply a soft dry microfibre cloth for wiping these areas. If you want to clean an area that is difficult to reach then you can make use of compressed air to blast out any dust.